PRINSU ROOF RACKS
Prinsu Roof Rack | Toyota Tacoma Access Cab 2005–2023
The original low-profile Prinsu platform, built specifically for the 2005–2023 Tacoma Access Cab.
The Prinsu Roof Rack for the 2005–2023 Toyota Tacoma Access Cab creates a strong, lightweight and fully modular roof platform for rooftop tents, recovery gear, bikes, kayaks, skis, cargo, awnings, lighting and overland equipment.
Built from high-grade aluminum and finished in durable black powder coat, the current rack also benefits from upgraded Prinsu crossbars with integrated drop-in mounting points and stainless-steel hardware.
Choose a Standard wind deflector or 40" Light Bar Cutout to suit your build.
IMPORTANT INSTALLATION NOTE
Access Cab Installation Requires Drilling.
Unlike the Tacoma Double Cab application, the Access Cab rack does not use existing factory roof mounting points. Installation requires drilling into the factory roof channels and installing supplied plus nuts to create secure rack mounting points.
Professional installation is recommended. Cap-it can confirm fitment and professionally install the rack at participating locations.
PRINSU ORIGINAL
Proven Platform. Updated Where It Matters.
This is the low-profile modular Prinsu architecture that made the brand so recognizable on Toyota trucks.
The current Access Cab rack keeps that proven lightweight design while benefiting from newer Prinsu crossbars with integrated drop-in mounting points and an upgraded stainless-steel hardware kit.
The result is a simple, strong rack that gives Access Cab owners a versatile platform for everything from daily adventure gear to rooftop tents and more complete overland builds.
BUILT FOR THE TACOMA
Lightweight. Strong. Fully Modular.
High-Grade Aluminum
Aluminum side rails and crossbars provide substantial strength without the weight and bulk of a traditional steel roof rack.
Integrated Drop-In Points
Updated Prinsu crossbars provide convenient drop-in mounting locations for compatible accessories and easier rack configuration.
Modular Crossbars
Position the crossbars around the gear you're carrying instead of being locked into one fixed cargo configuration.
CHOOSE YOUR WIND DEFLECTOR
Standard or 40" Light Bar Cutout?
CLEANEST CONFIGURATION
Standard
Choose the Standard wind deflector when you are not planning to integrate a forward-facing light bar into the front of the rack.
LIGHT BAR READY
40" Light Bar Cutout
The cutout wind deflector creates space for a compatible forward-facing 40-inch LED light bar integrated across the front of the rack.
Planning lighting later? Choosing the cutout now keeps that option open.
FULLY MODULAR
Build the Rack Around Your Tacoma.
A Prinsu rack isn't one fixed cargo solution. Its modular crossbar system creates a platform that can change as your Tacoma, your gear and your adventures do.
MODULAR BY DESIGN
Put the Crossbars Where You Need Them.
The Access Cab rack uses an adjustable crossbar system so the platform can be configured around different cargo, mounting hardware and accessories.
Drop-In Mounting Points
Integrated drop points help simplify the installation and repositioning of compatible rack accessories.
Adjustable Layout
Crossbar positioning can be tailored to cargo, rooftop tents, carriers and the rest of your roof-mounted equipment.
Low-Profile Design
The rack stays close to the roofline for the clean, integrated appearance Prinsu is known for.
CAPACITY
Published Rack Load Ratings
| Rack | Dynamic | Static |
|---|---|---|
| Prinsu Tacoma Access Cab Rack | 600 lb | 1,000 lb |
Remember: the rack's published capacity does not override Toyota's vehicle or roof-load limits. Rack configuration, number of crossbars, accessories, cargo and the vehicle itself must all be considered when determining a safe load.
TWO CONFIGURATIONS
Choose Your Wind Deflector.
| Wind Deflector | Part Number |
|---|---|
| Standard | 400-000-010-007 |
| 40" Light Bar Cutout | 400-000-010-008 |
VEHICLE FITMENT
Toyota Tacoma Access Cab | 2005–2023
- Vehicle: Toyota Tacoma
- Generations: 2nd & 3rd Generation
- Model Years: 2005–2023
- Cab: Access Cab
- Installation: Requires drilling into factory roof channels and installation of supplied plus nuts
- Wind Deflector: Standard or 40" Light Bar Cutout
- Construction: Aluminum with black powder-coated finish
- Hardware: Stainless steel
- Warranty: Limited Lifetime Warranty
Fitment matters: This rack is specifically designed for the Tacoma Access Cab and is not interchangeable with the Double Cab application. It is also not compatible with Tacomas equipped with the Toyota Desert Air Intake. Contact Cap-it if you're unsure which Tacoma roof rack you require.
PROFESSIONAL INSTALLATION
This Is One We'd Recommend Having Installed.
The Tacoma Access Cab application requires drilling into the factory roof channels and installing plus nuts to create the rack mounting points.
That makes careful measuring, drilling, sealing, hardware placement and headliner awareness especially important. On some applications, rear mounting hardware may also be close to the curtain-airbag mounting area.
Participating Cap-it locations can confirm fitment, professionally install your Prinsu rack and help complete the system with rooftop tents, recovery gear, cargo, awnings, lighting and other accessories.
Frequently Asked Questions
Does the Tacoma Access Cab rack require drilling?
Will this rack fit a Tacoma Double Cab?
Will this fit a Tacoma with the Toyota Desert Air Intake?
What does 40" Light Bar Cutout mean?
Can I mount a rooftop tent on this rack?
How much weight can the rack carry?
Can I add Prinsu accessories later?
Can Cap-it install my Access Cab roof rack?
THE CAP-IT TAKE
A Proper Rack for the Access Cab.
The shorter Access Cab roof doesn't mean giving up the advantages of a proper modular rack. This Prinsu system gives the 2005–2023 Access Cab a strong, useful roof platform while keeping the clean, low-profile appearance that suits the Tacoma so well.
The updated crossbars and stainless-steel hardware make the current rack even more useful, particularly if you plan to change accessories or evolve the build over time.
Our main advice: get the fitment right and take the drilling seriously. Once it's installed properly, build the rack around what you actually do with the truck.
FLEXITI FINANCING
Make the Complete Build Easier to Budget.
Equal-payment, no-interest financing options are available on qualifying purchases through Flexiti. Whether purchasing a Prinsu rack online or building a complete rack system with a local Cap-it dealer, Flexiti provides another way to manage a qualifying purchase. Subject to approval and applicable Flexiti terms. Financing offers and eligibility may vary.
PRINSU AT CAP-IT
Buy It Online. See It in Store. Have Us Install It.
Shop Prinsu online across Canada or visit a participating Cap-it location for fitment advice, professional installation and help building the complete Tacoma rack system.
A Canadian family business with nearly five decades of truck and adventure expertise.
A network of Cap-it stores, including locally owned and operated franchise locations.
Available through participating Cap-it locations.
Shop Prinsu online from coast to coast.
SHIPS FROM BRITISH COLUMBIA
Prinsu orders ship from Cap-it's Langley Township, BC Distribution Centre.
FREE SHIPPING IN CANADA*
On combined cart totals of $200+ before taxes, subject to our Shipping Policy.