PRINSU PRO | RIVIAN R1S
Prinsu Pro Roof Rack | Rivian R1S
A low-profile, high-capacity roof platform built specifically for the Rivian R1S.
The Prinsu Pro Roof Rack for the Rivian R1S combines lightweight aluminium construction with Prinsu's stronger Pro crossbars, redesigned side rails and factory-point mounting for a clean, vehicle-specific installation.
With up to 800 lb dynamic and 1,200 lb static published load capacity, the rack creates a serious platform for cargo, rooftop tents, recovery equipment and adventure gear.
No drilling. No permanent modification. Just a purpose-built Prinsu Pro system for the R1S.
THE PRINSU PRO DIFFERENCE
Built Stronger for Bigger Adventures.
The Prinsu Pro platform builds on the familiar low-profile Prinsu design with stronger crossbars, increased rigidity, improved mounting hardware and more integrated accessory-mounting options.
44% Stronger Crossbars
Prinsu's redesigned Pro extruded crossbars are published as 44% stronger than the previous design, creating a more substantial foundation for your gear.
Integrated Drop Points
Each crossbar includes six integrated drop points, making it easier to secure compatible accessories and mounting hardware into the T-slot system.
Increased Rigidity
The two-part side-rail design and upper bend add rigidity while creating additional opportunities for accessory mounting.
All-Aluminium Construction
Prinsu keeps the rack lightweight with aluminium construction while maintaining the strength required for demanding trail and travel setups.
Recessed Mounting Feet
Bolt-on recessed feet help preserve the low-profile appearance that defines the Prinsu system.
Corrosion-Resistant Hardware
Stainless-steel and corrosion-resistant black mounting hardware is designed for long-term exposure to changing weather and trail conditions.
PUBLISHED LOAD CAPACITY
Dynamic
Static
Prinsu publishes an 800 lb dynamic and 1,200 lb static load capacity for the R1S Pro Roof Rack. Always consider vehicle roof-load limits, load distribution and the weight of individual accessories when configuring your setup.
CHOOSE YOUR WIND DEFLECTOR
Standard or Light Bar Cutout.
The R1S Prinsu Pro Roof Rack is available with two wind-deflector configurations. Choose the version that matches how you plan to build your SUV.
Standard Wind Deflector
Clean, low-profile front wind deflector without a light-bar opening.
Part Number: PRI 400-002-033-001
Choose this configuration if you do not plan to integrate a front 40" light bar into the rack.
Wind Deflector with Light Bar Cutout
Designed for integrating a compatible 40" light bar into the front of the rack.
Part Number: PRI 400-002-033-002
Choose this configuration if a front-mounted light bar is part of your build.
FACTORY-POINT INSTALLATION
Bolt-On Fit. No Drilling Required.
The R1S Pro Roof Rack mounts directly to the Rivian's factory mounting points, eliminating the need to drill into or permanently modify the vehicle.
Recessed mounting feet help keep the rack close to the roof while maintaining a clean, purpose-built appearance.
The result is a strong, low-profile platform that looks like it belongs on the SUV.
ENDLESS MOUNTING
Build the Rack Around the Way You Use Your R1S.
The modular crossbars and T-slot mounting system create a flexible platform that can evolve with your SUV and your gear.
Rooftop Tents
Create a substantial platform for compatible rooftop tents and camp setups.
Cargo
Mount compatible cargo boxes, cases, baskets and other storage solutions above the vehicle.
Bikes & Watersports
Configure the rack for compatible bike, kayak, paddleboard and other recreational carriers.
Lighting
Choose the light-bar-cutout wind deflector to integrate a compatible 40" front light bar into your build.
Recovery Gear
Use compatible brackets and mounting hardware to carry recovery and trail equipment where it is accessible.
Your Configuration
Add compatible crossbars, brackets and Prinsu accessories as your equipment and adventures change.
VEHICLE FITMENT & SPECS
Rivian R1S
- Vehicle: Rivian R1S
- Rack Series: Prinsu Pro EV Series
- Construction: Aluminium
- Dynamic Load Capacity: 800 lb
- Static Load Capacity: 1,200 lb
- Crossbars: Prinsu Pro extruded aluminium crossbars
- Crossbar Strength: 44% stronger than previous Prinsu crossbar design
- Drop Points: 6 integrated mounting points per crossbar
- Installation: Direct bolt-on using factory Rivian mounting points
- Drilling: Not required
- Hardware: Stainless-steel and corrosion-resistant black mounting hardware
- Finish: Satin-black textured powder coat
- Light Bar: Optional 40" light-bar wind-deflector cutout
- Warranty: Prinsu Lifetime Warranty
Configuration: Select Standard Wind Deflector or Wind Deflector with Light Bar Cutout.
PROFESSIONAL INSTALLATION
Have Cap-it Install It.
The R1S Prinsu Pro Roof Rack uses the vehicle's factory mounting points for a direct bolt-on installation.
Participating Cap-it locations can help with rack fitment, installation and compatible accessories so you can build the system around how you actually use your Rivian.
Contact your nearest Cap-it location for fitment confirmation and installation availability.
Frequently Asked Questions
Yes. This Prinsu Pro EV Series rack is designed specifically for the Rivian R1S.
No. The Rivian R1S roof-rack application is offered as a Prinsu Pro rack.
Prinsu publishes an 800 lb dynamic and 1,200 lb static load capacity for this rack.
No. The rack bolts directly to the Rivian R1S factory mounting points without drilling or permanent modification.
The Standard version uses a conventional wind deflector. The Light Bar Cutout version is designed to accommodate a compatible 40" front light bar.
Each Pro crossbar includes six integrated mounting points designed to make it easier to attach compatible accessories and hardware to the rack's T-slot system.
The rack is designed as a high-capacity modular platform for compatible rooftop tents, cargo and other roof-mounted equipment. Always confirm the mounting requirements and weight limits of the equipment being installed.
Professional installation is available through participating Cap-it locations. Contact your nearest store for fitment confirmation and installation scheduling.
THE CAP-IT TAKE
Turn the R1S Into a Serious Adventure Platform.
The R1S already combines passenger space, enclosed storage and serious capability. The Prinsu Pro Rack gives you another place to carry the equipment that doesn't need to live inside the SUV.
Factory mounting points mean no drilling, while the low-profile aluminium platform gives you a flexible foundation for tents, cargo, bikes, lighting and adventure equipment.
The 800 lb dynamic and 1,200 lb static published capacities give the R1S version particularly substantial carrying capability.
If you're building an R1S for travel, camping or trail use, the Prinsu Pro gives you a strong foundation to build from.
PRINSU AT CAP-IT
Build the Rivian You Actually Want to Use.
Shop Prinsu online across Canada or visit a participating Cap-it location for fitment advice, professional installation and help building your complete Rivian system.
Decades of truck and adventure accessory experience.
Real stores and real product specialists.
Have your Prinsu system installed properly.
Shop Prinsu from coast to coast.