PRINSU ROOF RACKS
Prinsu Roof Rack | Toyota Tacoma 2024+
Choose Prinsu Pro for maximum capability, or Prinsu Original for the proven platform that made the brand famous.
The Prinsu Roof Rack for the 2024+ Toyota Tacoma transforms the roof of your 4th Generation Tacoma into a low-profile, modular platform for rooftop tents, recovery gear, bikes, kayaks, skis, cargo, awnings, lighting and overland equipment.
Both rack systems are purpose-built for the current-generation Tacoma and follow the same Prinsu philosophy: lightweight aluminium construction, vehicle-specific fitment, modular crossbars and the freedom to configure the rack around the way you actually use your truck.
Choose your Rack Series, then select a Standard wind deflector or 40" Light Bar Cutout.
CHOOSE YOUR PRINSU
Pro or Original? Both Are Real Prinsu.
The choice isn't between a good rack and a bad rack. It's about how much capability you need from the platform.
The current Prinsu Original already benefits from upgraded Prinsu Pro crossbars and stainless-steel hardware, while keeping the lightweight, modular architecture that established the Prinsu name.
Prinsu Pro builds further with reinforced two-part side rails, an integrated top flange, recessed mounting feet, additional mounting flexibility and higher published rack capacity.
Prinsu Pro
More structural reinforcement, more mounting flexibility and increased published capacity.
- Redesigned high-strength crossbars
- 6 integrated drop-in points per crossbar
- Two-part side-rail design for increased rigidity
- Integrated top flange adds structural reinforcement
- Corrosion-resistant stainless-steel hardware
- Recessed bolt-on mounting feet
- 700 lb dynamic published rack rating
- 1,200 lb static published rack rating
Best for: rooftop tents, heavier overland builds, recovery equipment, extensive accessory mounting, frequent rough-road travel and Tacoma owners who want maximum capability from the platform.
Prinsu Original
Lightweight, modular and now upgraded with Pro crossbars and stainless-steel hardware.
- High-quality aluminium construction
- Black powder-coated finish
- Upgraded Prinsu Pro crossbars
- Stainless-steel hardware kit
- Built-in drop points for accessory mounting
- Six moveable crossbars
- Noise-reducing trim included
- 600 lb dynamic published rack rating
- 1,000 lb static published rack rating
Best for: daily-driven Tacomas carrying bikes, skis, kayaks, cargo, camping equipment and other adventure gear where value, low weight and modularity matter.
THE REAL DECISION
You Don't Automatically Need the Pro.
The current Original Prinsu Rack is more capable than ever. If your Tacoma is carrying bikes, skis, kayaks, cargo boxes, camping equipment or normal recreational gear, the Original may be all the rack you need.
Move to Prinsu Pro when the rack becomes a more significant part of the build, particularly with rooftop tents, heavier accessory loads, frequent rough-road travel or when the Pro's reinforced rail architecture, additional mounting flexibility and higher published load ratings have real value to you.
SECOND CHOICE
Standard or 40" Light Bar Cutout?
CLEANEST CONFIGURATION
Standard
Choose the Standard wind deflector when you are not planning to integrate a forward-facing light bar into the front of the rack.
LIGHT BAR READY
40" Light Bar Cutout
The cutout wind deflector creates space for a compatible forward-facing 40-inch LED light bar integrated across the front of the rack.
Planning lighting later? Choosing the cutout now keeps that option open without changing your rack series.
FULLY MODULAR
Build the Rack Around Your Tacoma.
A Prinsu rack isn't one fixed cargo solution. Its modular crossbar system creates a platform that can change as your Tacoma, your gear and your adventures do.
PRINSU PRO
Where the Pro Goes Further.
The Original Tacoma rack now shares some important Pro upgrades, but the complete Pro architecture still goes further with reinforced side rails, integrated structural features, recessed mounting feet and increased published load capacity.
6 Drop-In Points Per Crossbar
Integrated drop-in locations make it easier to position and reconfigure compatible accessories across the rack.
Integrated Top Flange
The Pro side-rail architecture incorporates a reinforced upper flange designed to significantly increase structural strength.
Recessed Mounting Feet
Recessed bolt-on mounting feet help maintain the low-profile, integrated appearance that defines the Pro system.
CAPACITY
Published Rack Load Ratings
| Rack Series | Dynamic | Static |
|---|---|---|
| Prinsu Pro | 700 lb | 1,200 lb |
| Prinsu Original | 600 lb | 1,000 lb |
Remember: the rack's published capacity does not override Toyota's vehicle or roof-load limits. Rack configuration, number of crossbars, accessories, cargo and the vehicle itself must all be considered when determining a safe load.
FOUR CONFIGURATIONS
Pick Your Rack. Pick Your Wind Deflector.
| Rack Series | Wind Deflector | Prinsu Part Number |
|---|---|---|
| Prinsu Pro | Standard | 400-002-010-007 |
| Prinsu Pro | 40" Light Bar Cutout | 400-002-010-008 |
| Prinsu Original | Standard | 400-000-010-070 |
| Prinsu Original | 40" Light Bar Cutout | 400-000-010-069 |
VEHICLE FITMENT
Toyota Tacoma | 2024+
- Vehicle: Toyota Tacoma, 4th Generation
- Model Years: 2024+
- Cab: Double Cab
- Installation: Bolt-on, no-drill design using factory mounting locations
- Rack Series: Prinsu Pro or Prinsu Original
- Wind Deflector: Standard or 40" Light Bar Cutout
- Warranty: Limited Lifetime Warranty
Have a different Tacoma cab configuration or aren't sure which application you have? Contact Cap-it before ordering so we can confirm fitment.
PROFESSIONAL INSTALLATION
Buy the Rack. Have Cap-it Install It.
The 2024+ Tacoma Prinsu roof rack uses factory mounting locations for a bolt-on installation without drilling into the roof.
Proper installation still matters. Factory trim, mounting hardware, sealing, rack alignment, accessory placement and final load configuration all contribute to a clean, reliable finished build.
Participating Cap-it locations can confirm fitment, install your Prinsu rack and help complete your Tacoma with rooftop tents, recovery gear, bikes, kayaks, cargo, awnings, lighting and other accessories.
Frequently Asked Questions
Both are lightweight, modular Prinsu platforms. The current Original Tacoma rack includes upgraded Prinsu Pro crossbars and stainless-steel hardware. The complete Pro rack adds its reinforced two-part side-rail architecture, integrated top flange, recessed mounting feet, additional mounting flexibility and higher published rack ratings.
No. Prinsu specifies factory mounting-point installation for the 2024+ Tacoma roof rack.
The front wind deflector is configured with an opening for a compatible forward-facing 40-inch LED light bar. Choose Standard if you do not plan to integrate a light bar into the front of the rack.
Prinsu racks are commonly used as rooftop-tent platforms. The final installation must remain within Toyota's vehicle limits and the requirements of the rack configuration, tent and mounting hardware.
If the rooftop tent and other equipment make the roof rack a major structural part of your Tacoma build, we'd generally favour the Pro for its reinforced architecture, additional mounting flexibility and higher published rack capacity.
Prinsu publishes the Pro at 700 lb dynamic and 1,200 lb static, and the Original at 600 lb dynamic and 1,000 lb static. Vehicle limitations and the complete rack configuration must also be considered.
Yes. Modularity is one of the core advantages of the Prinsu system. Crossbars and mounting points allow you to change the rack configuration as your gear and adventures change.
Professional installation is available through participating Cap-it locations. Contact your nearest store for fitment confirmation and installation scheduling.
THE CAP-IT TAKE
The Tacoma Was Made for a Rack Like This.
The Tacoma is one of those trucks that can change jobs completely between Monday morning and Friday afternoon. Work gear during the week, then bikes, skis, camping equipment, kayaks or a rooftop tent when it's time to get away.
We wouldn't automatically put every Tacoma owner into the Prinsu Pro. The current Prinsu Original already gives you a very capable, lightweight modular rack and now benefits from upgraded crossbars and stainless-steel hardware.
If you're building the Tacoma into a more serious overland platform, particularly with a rooftop tent, heavier equipment, frequent rough-road travel or extensive accessory mounting, we'd choose the Prinsu Pro.
Choose the rack for what you're actually going to do with the truck.
PRINSU AT CAP-IT
Buy It Online. See It in Store. Have Us Install It.
Shop Prinsu online across Canada or visit a participating Cap-it location for fitment advice, professional installation and help building the complete Tacoma rack system.
Decades of truck and adventure accessory experience.
Real stores and real product specialists.
Have the rack installed properly.
Shop Prinsu from coast to coast.