PRINSU PRO ROOF RACK
Prinsu Roof Rack | Toyota Land Cruiser 250 & Lexus GX 550
One Prinsu Pro platform. Two closely related adventure vehicles.
The Prinsu Pro Roof Rack for the Toyota Land Cruiser 250 and Lexus GX 550 transforms the factory roof into a low-profile, modular platform for rooftop tents, recovery gear, bikes, kayaks, skis, cargo, awnings, lighting and overland equipment.
Built around Prinsu's reinforced Pro architecture, this rack combines high-strength crossbars, integrated accessory mounting points, two-part side rails, stainless-steel hardware and serious published load capacity in a clean vehicle-specific design.
Choose a Standard wind deflector or 40" Light Bar Cutout.
PRINSU PRO
This Application Starts With the Pro.
There is no Original Prinsu variant in this listing. The GX 550 / Land Cruiser 250 platform is offered here exclusively with the stronger Prinsu Pro architecture.
That means reinforced two-part side rails, redesigned high-strength crossbars, six integrated drop-in points per crossbar, stainless-steel hardware, recessed mounting feet and Prinsu's higher published Pro rack ratings.
Prinsu Pro
Built for the kind of loads and accessory configurations serious adventure vehicles eventually grow into.
- Redesigned crossbars rated by Prinsu as 44% stronger
- 6 integrated drop-in points per crossbar
- Two-part side-rail design for increased rigidity
- Integrated upper bend / flange adds structural reinforcement
- Corrosion-resistant stainless-steel hardware
- Recessed bolt-on mounting feet
- Low-profile vehicle-specific design
- 700 lb dynamic published rack rating
- 1,200 lb static published rack rating
- Limited Lifetime Warranty
Built for: rooftop tents, recovery equipment, larger overland builds, lighting, awnings, bikes, kayaks, cargo and customers who want maximum flexibility from their roof platform.
CHOOSE YOUR CONFIGURATION
Standard or 40" Light Bar Cutout?
CLEANEST CONFIGURATION
Standard
Choose the Standard wind deflector when you are not planning to integrate a forward-facing light bar into the front of the rack.
LIGHT BAR READY
40" Light Bar Cutout
The cutout wind deflector creates space for a compatible forward-facing 40-inch LED light bar integrated across the front of the rack.
Planning lighting later? Choosing the cutout now keeps that option open.
FULLY MODULAR
Build the Roof Around the Trip.
The Prinsu Pro isn't one fixed cargo solution. Its modular crossbar system creates a platform that can evolve as your vehicle and your adventures do.
PRINSU PRO ENGINEERING
Strength Without Turning the Roof Into a Cage.
The Prinsu Pro architecture strengthens the parts of the rack that matter while retaining the clean, low-profile appearance that made Prinsu recognizable.
6 Drop-In Points Per Crossbar
Integrated drop-in locations make it easier to position and reconfigure compatible accessories without constantly feeding hardware in from the end of the bar.
Stainless-Steel Hardware
Corrosion-resistant stainless hardware supports long-term durability through Canadian weather, road spray and year-round use.
Recessed Mounting Feet
Recessed bolt-on mounting feet help maintain the clean, low-profile appearance that defines the Prinsu Pro system.
CAPACITY
Prinsu Pro Published Rack Load Ratings
Remember: the rack's published capacity does not override Lexus or Toyota vehicle roof-load limits. Rack configuration, accessories, cargo and the vehicle itself must all be considered when determining a safe load.
TWO CONFIGURATIONS
Same Rack. Choose Your Wind Deflector.
| Wind Deflector | Prinsu Part Number | Vehicle Fitment |
|---|---|---|
| Standard | 400-002-016-003 | Lexus GX 550 / Toyota Land Cruiser 250 |
| 40" Light Bar Cutout | 400-002-016-004 | Lexus GX 550 / Toyota Land Cruiser 250 |
COMPLETE THE SYSTEM
The Rack Is Shared. The Accessories Aren't.
The Prinsu Pro roof rack fits both the Lexus GX 550 and Toyota Land Cruiser 250, but the rear Window Accessory Panels and ladders are vehicle-specific. Make sure you choose accessories designed for your vehicle.
TOYOTA LAND CRUISER 250
Vehicle-Specific Accessories
- Driver Accessory Panel: 600-000-000-322
- Passenger Accessory Panel: 600-000-000-323
- Prinsu Ladder: 600-000-000-625
LEXUS GX 550
Vehicle-Specific Accessories
- Driver Accessory Panel: 600-000-000-336
- Passenger Accessory Panel: 600-000-000-337
- Prinsu Ladder: 600-000-000-334
VEHICLE FITMENT
Lexus GX 550 & Toyota Land Cruiser 250
- Lexus: GX 550
- Toyota: Land Cruiser 250 Series, 2024+
- Rack Series: Prinsu Pro
- Installation: No-drill, bolt-on installation
- Crossbars: 10 x 47"
- Rack Weight: Approximately 70 lb
- Height Added: Approximately 3.5"
- Wind Deflector: Standard or 40" Light Bar Cutout
- Warranty: Limited Lifetime Warranty
The same rack SKUs fit both vehicle platforms. Window Accessory Panels and ladders are vehicle-specific and should be selected separately.
PROFESSIONAL INSTALLATION
Buy the Rack. Have Cap-it Install It.
Prinsu specifies no-drill installation for this rack platform, using vehicle mounting points rather than requiring permanent roof modification.
Proper installation still matters. Mounting hardware, sealing, rack alignment, accessory placement and final load configuration all contribute to a clean, reliable finished build.
Participating Cap-it locations can confirm fitment, install your Prinsu Pro rack and help build the rest of the vehicle around rooftop tents, recovery equipment, cargo, awnings, lighting and vehicle-specific Prinsu accessories.
Frequently Asked Questions
Yes. Cap-it stocks Prinsu Pro part numbers 400-002-016-003 and 400-002-016-004 as the shared roof-rack applications for the Lexus GX 550 and Toyota Land Cruiser 250.
This application is offered by Cap-it as a Prinsu Pro roof rack. There is no Original rack option in this listing.
The front wind deflector includes an opening for a compatible forward-facing 40-inch LED light bar. Choose Standard if you do not plan to integrate a light bar into the front of the rack.
No. Prinsu specifies this platform as a no-drill installation.
Prinsu Pro racks are commonly used as rooftop-tent platforms. The complete setup must remain within the load limits of the vehicle, rack configuration, tent and mounting hardware.
Prinsu publishes a 700 lb dynamic and 1,200 lb static rack rating. Vehicle limits and the complete rack configuration must also be considered.
No. The roof rack is shared, but the rear Window Accessory Panels are vehicle-specific. Choose the panel designed for your Lexus GX 550 or Toyota Land Cruiser 250.
No. The GX 550 and Land Cruiser 250 use different Prinsu ladder applications.
Professional installation is available through participating Cap-it locations. Contact your nearest store for fitment confirmation and installation scheduling.
THE CAP-IT TAKE
Two Vehicles That Beg to Be Built.
The GX 550 and Land Cruiser 250 share a lot underneath, but they can end up serving very different owners. One may stay closer to premium daily-driver duty, while the other gets pushed quickly toward camping, recovery equipment and overland travel.
The Prinsu Pro works for both because the platform doesn't force you into one use. Keep it clean and carry skis, bikes or a cargo box. Add an awning. Add recovery gear. Add a rooftop tent and turn the roof into a major part of the build.
We particularly like that this application starts with the Prinsu Pro. These are vehicles with serious adventure potential, and the stronger rail architecture, flexible mounting system and published load capacity give you room to grow into the rack.
Start with the platform. Build the vehicle around how you actually plan to use it.
PRINSU AT CAP-IT
Buy It Online. See It in Store. Have Us Install It.
Shop Prinsu online across Canada or visit a participating Cap-it location for fitment advice, professional installation and help building your GX 550 or Land Cruiser 250.
Decades of truck and adventure accessory experience.
Real stores and real product specialists.
Have the rack installed properly.
Shop Prinsu from coast to coast.