IRONMAN 4X4 RAID SERIES
Raid Front Winch Bumper
Serious Protection. Real Recovery Capability.
Fits 2024+ Toyota Tacoma.
The Raid Front Winch Bumper adds chassis-mounted recovery capability, improved off-road clearance, integrated lighting provisions and crash-tested steel protection without giving up the Tacoma's factory sensors and cameras.
THE CAP-IT TAKE
A Recovery Bumper Built the Right Way
This is more than a steel bumper shell. Ironman separates the recovery structure from the outer bumper by mounting the winch cradle directly to the Tacoma chassis.
That keeps heavy recovery loads out of the outer shell and gives the winch a much stronger structural foundation. At the same time, you gain better front-end protection, improved obstacle clearance and clean integration for optional Ironman lighting.
For a 4th Gen Tacoma that actually gets used off road, the Raid gives you the recovery capability you want without sacrificing the factory technology built into the truck.
Why the Raid Bumper Is Different
Chassis-Mounted Winch Cradle
The winch cradle mounts directly to the chassis to help prevent twisting and deformation during demanding recoveries.
Rated Recovery Points Included
Bolt-on, frame-mounted rated recovery points transfer pulling loads into the chassis rather than the outer bumper shell.
Factory Systems Stay
Designed to remain compatible with factory parking sensors, proximity sensors and cameras.
Integrated Lighting
Dedicated openings accept a 20" centre Bright Saber and two 7" Bright Saber-X auxiliary light bars.
NEW LOW PRICE
FROM $870 CAD
Choose the bumper on its own or add the matching Ironman 4x4 Bright Saber lighting.
No artificial sale language, just the new lower regular price on the Raid bumper and straightforward lighting options.
Choose Your Lighting Setup
CENTRE LIGHT
20" Bright Saber
P/N ILBSR003BW
Fits the dedicated centre opening in the Raid bumper for a clean, integrated light-bar installation.
AUXILIARY LIGHTS
2 × 7" Bright Saber-X
P/N ILBSR005B × 2
Fill the dual auxiliary openings for a complete Ironman lighting setup.
Select the bumper only, centre light, auxiliary lights or the complete lighting package using the product options above. Wiring harness is not included.
Exactly What's Included
| Component | Part Number | Qty | Included |
|---|---|---|---|
| Raid Front Winch Bumper | BBR119IK | 1 | All configurations |
| Direct-to-Chassis Winch Cradle | Included with bumper | 1 | All configurations |
| Frame-Mounted Rated Recovery Points | Included with bumper | 1 set | All configurations |
| 20" Bright Saber LED Light Bar | ILBSR003BW | 1 | When selected |
| 7" Bright Saber-X LED Light Bar | ILBSR005B | 2 | When selected |
Not included: Winch and wiring harness. Roller fairleads are not compatible with this bumper.
VEHICLE FITMENT
Built for the 4th Gen Tacoma
- Toyota Tacoma: 2024+
Designed to retain factory parking sensors, proximity sensors and cameras.
+Specifications & Construction
- Approximate weight: 120 lb
- Two-stage bumper and winch-cradle design
- Standard 10" × 4.5" winch mounting footprint
- Bolt-on frame-mounted rated recovery points included
- Integrated hi-lift jack points
- Integrated centre and dual auxiliary light-bar openings
- ADR 69 and 73 tested
- SRS airbag tested and certified
- Integrated crumple zones
- Pickled cold-rolled steel construction
- 360° robotic welding
- AKZO NOBEL black powder-coated finish
+Choosing & Fitting a Winch
Start with the bolt pattern. The Raid uses the standard 10" × 4.5" winch mounting footprint.
Then check physical clearance. Confirm drum length, motor housing, control-box location and clutch-handle access.
Use a hawse fairlead. Roller fairleads are not compatible with this bumper.
+Lighting & Wiring
The Raid is available with the 20" Bright Saber centre light bar, two 7" Bright Saber-X auxiliary light bars, or all three lights.
A wiring harness is not included, allowing the wiring to be matched to the equipment on your truck.
+Installation
The winch cradle mounts to the chassis first, followed by the bumper shell. At approximately 120 lb, a second person is recommended when lifting and aligning the bumper.
If you are installing a winch or lighting, complete as much wiring as possible before final bumper installation while access is easiest. Test factory sensors and camera view before final tightening.
+Frequently Asked Questions
Will my factory sensors and cameras still work?
Yes. The Raid is designed to retain the Tacoma's factory parking sensors, proximity sensors and cameras.
Are recovery points included?
Yes. Frame-mounted rated recovery points are included.
Can I use my existing winch?
Potentially. It must use the standard 10" × 4.5" mounting footprint and physically clear the cradle.
Can I use a roller fairlead?
No. A compatible hawse fairlead is required.
Are the lights included?
Only when a lighting-equipped configuration is selected.
Is a wiring harness included?
No.
WHY BUY IRONMAN 4X4 FROM CAP-IT?
Build the Tacoma for the Way You Actually Use It.
Cap-it has specialized in truck accessories, recovery equipment and adventure gear since 1977. We understand that a bumper has to do more than look tough, it has to work with the truck, the recovery gear and the lighting you actually use.
Choose the Raid bumper on its own or configure it with the matching Ironman 4x4 Bright Saber lighting.