PRINSU ROOF RACKS

Prinsu Roof Rack | Toyota 4Runner 2025+

Choose Prinsu Pro for maximum capability, or Prinsu Original for the proven platform that made the brand famous.

The Prinsu Roof Rack for the 2025+ Toyota 4Runner (6th Generation) transforms the factory roof into a low-profile, modular platform for rooftop tents, recovery gear, bikes, skis, kayaks, cargo, awnings, lighting and overland equipment.

Both rack systems are purpose-built for the 6th Gen 4Runner and follow the same Prinsu philosophy: lightweight aluminium construction, a clean vehicle-specific fit, modular crossbars and the freedom to configure the rack around the way you actually use your 4Runner.

Choose your Rack Series, then select a Standard wind deflector or Light Bar Cutout.

2025+

Toyota 4Runner

Pro or Original

Choose Your Rack

No-Drill

Bolt-On Installation

Made in USA

Prinsu Construction

CHOOSE YOUR PRINSU

Pro or Original? Both Are Real Prinsu.

The choice isn't between a good rack and a bad rack. It's about how much capability you need from the platform.

Prinsu Pro adds greater crossbar strength, increased rigidity, more integrated mounting points and higher published load capacity. Prinsu Original keeps the lightweight, modular architecture that made Prinsu one of the most recognizable roof-rack systems in the adventure market.

MAXIMUM CAPABILITY

Prinsu Pro

More strength, more mounting flexibility and increased published capacity.

Crossbars rated by Prinsu as 44% stronger
6 integrated drop-in points per crossbar
Two-part side-rail design for increased rigidity
Corrosion-resistant stainless steel hardware
Recessed bolt-on mounting feet
700 lb dynamic published rack rating
1,200 lb static published rack rating

Best for: rooftop tents, heavier overland builds, recovery equipment, frequent rough-road travel, extensive accessory mounting and customers who want maximum capability from their 4Runner roof platform.

PROVEN PLATFORM

Prinsu Original

Lightweight, modular and built around the design philosophy that made Prinsu famous.

High-quality aluminium construction
Black powder-coated finish
Custom modular crossbars
Integrated drop points for accessory mounting
Low-profile vehicle-specific design
Noise-reducing trim included
Fully modular architecture

Best for: daily-driven 4Runners carrying bikes, skis, kayaks, cargo, camping equipment and other adventure gear where value, low weight and modularity matter.

THE REAL DECISION

You Don't Automatically Need the Pro.

The Original Prinsu Rack remains a very capable platform. If your 4Runner is carrying bikes, skis, kayaks, cargo boxes or normal recreational equipment, the Original may be all the rack you need.

Move to Prinsu Pro when the roof rack becomes a more significant part of the build, particularly with rooftop tents, heavier accessory loads, recovery equipment, frequent rough-road travel or when the additional mounting flexibility and structural rigidity have real value to you.

SECOND CHOICE

Standard or Light Bar Cutout?

CLEANEST CONFIGURATION

Standard

Choose the standard wind deflector when you are not planning to integrate a forward-facing light bar into the front of the rack.

LIGHT BAR READY

Light Bar Cutout

The cutout deflector creates space for a compatible forward-facing LED light bar integrated into the front of the rack.

Planning lighting later? Choosing the cutout now keeps that option open without changing your rack series.

FULLY MODULAR

Build the Rack Around Your 4Runner.

A Prinsu rack isn't one fixed cargo solution. Its modular crossbar system creates a platform that can change as your 4Runner and your adventures do.

Rooftop Tents

Recovery Gear

Bikes

Kayaks

Skis & Snowboards

Cargo Boxes

Awnings

Lighting

PRINSU PRO

Engineered Beyond the Original.

The difference between Original and Pro isn't just visible on a specification sheet. The Pro architecture changes the crossbars, side rails, mounting points and hardware to create a stronger, more configurable roof-rack platform.

Prinsu Pro roof rack crossbar and side rail detail

STRONGER CROSSBARS

44% More Strength

Prinsu rates the redesigned Pro crossbar architecture as 44% stronger, adding capability without abandoning the low-profile design that defines the rack.

TWO-PART SIDE RAILS

Strength + Mounting Flexibility

The reinforced two-part side-rail design increases rigidity while creating additional locations for mounting and configuring accessories.

LOW-PROFILE DESIGN

Engineered to Look Integrated

The Pro maintains Prinsu's close-to-the-roof profile while integrating its reinforced rail architecture into a clean, vehicle-specific finished rack.

6 Drop-In Points Per Crossbar

Six integrated drop-in locations give you more freedom to position gear and accessories without constantly sliding hardware in from the end of the bar.

Stainless Steel Hardware

Corrosion-resistant stainless hardware supports long-term durability through Canadian weather, road spray and year-round use.

Recessed Mounting Feet

The Pro mounting system is recessed into the side-rail architecture to maintain a cleaner and more integrated overall profile.

CAPACITY

Prinsu Pro Published Rack Load Ratings

DYNAMIC

700 lb

Published Pro Rack Rating

STATIC

1,200 lb

Published Pro Rack Rating

Remember: the rack's published capacity does not override Toyota's vehicle or roof-load limits. The vehicle, rack configuration, accessories and cargo must all be considered when determining a safe load.

EXPAND THE SYSTEM

Take Your 4Runner Build Beyond the Roof.

The 6th Gen 4Runner is supported by a growing Prinsu accessory ecosystem, including vehicle-specific side accessory panels designed to integrate with the corresponding Prinsu roof rack.

These panels create additional mounting space along the rear side windows for recovery gear, lighting, communication equipment, tools and other trail essentials without consuming valuable roof-rack space.

Build it in stages. Start with the roof rack, then expand the system as the way you use your 4Runner evolves.

VEHICLE FITMENT

Toyota 4Runner | 2025+

Vehicle: Toyota 4Runner, 6th Generation
Model Years: 2025+
Installation: Bolt-on, no-drill design using factory mounting locations
Rack Series: Prinsu Pro or Prinsu Original
Wind Deflector: Standard or Light Bar Cutout

Not sure which configuration is right for your 4Runner? Contact Cap-it before ordering and we'll help confirm the rack and wind-deflector combination for your build.

PROFESSIONAL INSTALLATION

Buy the Rack. Have Cap-it Install It.

The 2025+ 4Runner Prinsu rack uses the vehicle's factory roof mounting locations, allowing installation without drilling into the roof.

Even with a bolt-on system, proper installation matters. Factory trim, mounting hardware, sealing, rack alignment and accessory placement all contribute to a clean, reliable finished build.

Participating Cap-it locations can confirm fitment, install your Prinsu rack and help complete the system with rooftop tents, recovery gear, bikes, kayaks, cargo, awnings, lighting and other accessories.

Frequently Asked Questions

What is the difference between Prinsu Pro and Prinsu Original?

Prinsu Pro adds stronger crossbars, six integrated drop-in mounting points per crossbar, increased side-rail rigidity, stainless hardware and higher published rack capacity. The Original remains Prinsu's proven lightweight, modular roof-rack platform.

Does this rack require drilling into my 4Runner?

No. The Prinsu roof-rack systems for the 2025+ 6th Gen Toyota 4Runner use factory mounting locations for a bolt-on, no-drill installation.

What does Light Bar Cutout mean?

The front wind deflector includes an opening designed to accommodate a compatible forward-facing LED light bar. Select Standard if you do not plan to integrate a light bar into the front of the rack.

Can I mount a rooftop tent on my Prinsu 4Runner rack?

Prinsu racks are commonly used as rooftop-tent platforms. The complete installation must remain within Toyota's vehicle limits and the requirements of the tent, rack configuration and mounting hardware.

Should I buy Prinsu Pro for a rooftop tent?

For a build where the rooftop tent and other heavier equipment make the rack a major structural part of the setup, we would generally favour the Prinsu Pro for its stronger crossbars, increased rigidity and higher published rack capacity.

Can I add Prinsu accessories later?

Yes. Modularity is one of the core advantages of the Prinsu platform. Crossbars and mounting points allow the rack to change as your equipment and adventures change, and vehicle-specific accessory panels provide additional mounting opportunities on the 6th Gen 4Runner.

Can Cap-it install my Prinsu roof rack?

Professional installation is available through participating Cap-it locations. Contact your nearest store for fitment confirmation and installation scheduling.

THE CAP-IT TAKE

The 4Runner and Prinsu Just Make Sense Together.

The Toyota 4Runner is exactly the type of vehicle the Prinsu platform was made for. It might spend Monday through Friday commuting, then carry bikes, skis, camping equipment, recovery gear or a rooftop tent when the weekend arrives.

We wouldn't automatically put every 4Runner owner into the Prinsu Pro. If you're carrying normal recreational equipment and want a lightweight, low-profile modular rack, the Prinsu Original remains an excellent choice.

If you're building the 4Runner into a more serious overland platform, particularly with a rooftop tent, heavier equipment, recovery gear, frequent rough-road travel or extensive accessory mounting, we'd choose the Prinsu Pro.

Build the rack for what you're actually going to do with the 4Runner.

PRINSU AT CAP-IT

Buy It Online. See It in Store. Have Us Install It.

Shop Prinsu online across Canada or visit a participating Cap-it location for fitment advice, professional installation and help building the complete rack system.

Established 1977

Decades of truck and adventure accessory experience.

25+ Retail Locations

Real stores and real product specialists.

Professional Installation

Have the rack installed properly.

Canada-Wide Online

Shop Prinsu from coast to coast.

FIND YOUR NEAREST CAP-IT