PRINSU PRO ROOF RACK

Prinsu Roof Rack | Toyota Land Cruiser 250 & Lexus GX 550

One Prinsu Pro platform. Two closely related adventure vehicles.

The Prinsu Pro Roof Rack for the Toyota Land Cruiser 250 and Lexus GX 550 transforms the factory roof into a low-profile, modular platform for rooftop tents, recovery gear, bikes, kayaks, skis, cargo, awnings, lighting and overland equipment.

Built around Prinsu's reinforced Pro architecture, this rack combines high-strength crossbars, integrated accessory mounting points, two-part side rails, stainless-steel hardware and serious published load capacity in a clean vehicle-specific design.

Choose a Standard wind deflector or 40" Light Bar Cutout.

GX 550 + LC 250

Shared Rack Platform

Prinsu Pro

Maximum Capability

No-Drill

Factory Mounting Points

700 / 1,200 lb

Dynamic / Static

PRINSU PRO

This Application Starts With the Pro.

There is no Original Prinsu variant in this listing. The GX 550 / Land Cruiser 250 platform is offered here exclusively with the stronger Prinsu Pro architecture.

That means reinforced two-part side rails, redesigned high-strength crossbars, six integrated drop-in points per crossbar, stainless-steel hardware, recessed mounting feet and Prinsu's higher published Pro rack ratings.

MAXIMUM CAPABILITY

Prinsu Pro

Built for the kind of loads and accessory configurations serious adventure vehicles eventually grow into.

Redesigned crossbars rated by Prinsu as 44% stronger
6 integrated drop-in points per crossbar
Two-part side-rail design for increased rigidity
Integrated upper bend / flange adds structural reinforcement
Corrosion-resistant stainless-steel hardware
Recessed bolt-on mounting feet
Low-profile vehicle-specific design
700 lb dynamic published rack rating
1,200 lb static published rack rating
Limited Lifetime Warranty

Built for: rooftop tents, recovery equipment, larger overland builds, lighting, awnings, bikes, kayaks, cargo and customers who want maximum flexibility from their roof platform.

CHOOSE YOUR CONFIGURATION

Standard or 40" Light Bar Cutout?

CLEANEST CONFIGURATION

Standard

Choose the Standard wind deflector when you are not planning to integrate a forward-facing light bar into the front of the rack.

LIGHT BAR READY

40" Light Bar Cutout

The cutout wind deflector creates space for a compatible forward-facing 40-inch LED light bar integrated across the front of the rack.

Planning lighting later? Choosing the cutout now keeps that option open.

FULLY MODULAR

Build the Roof Around the Trip.

The Prinsu Pro isn't one fixed cargo solution. Its modular crossbar system creates a platform that can evolve as your vehicle and your adventures do.

Rooftop Tents

Recovery Gear

Bikes

Kayaks

Skis & Snowboards

Cargo Boxes

Awnings

Lighting

PRINSU PRO ENGINEERING

Strength Without Turning the Roof Into a Cage.

The Prinsu Pro architecture strengthens the parts of the rack that matter while retaining the clean, low-profile appearance that made Prinsu recognizable.

REDESIGNED CROSSBARS

44% Stronger

Prinsu rates the redesigned Pro crossbars as 44% stronger than the previous architecture while adding integrated drop-in mounting points.

TWO-PART SIDE RAILS

More Rigidity + More Mounting

The reinforced two-part rail design increases rigidity while creating additional mounting opportunities along the rack.

LOW-PROFILE DESIGN

Built to Look Integrated

Recessed mounting feet and vehicle-specific side rails keep the rack close to the roof for a cleaner finished appearance.

6 Drop-In Points Per Crossbar

Integrated drop-in locations make it easier to position and reconfigure compatible accessories without constantly feeding hardware in from the end of the bar.

Stainless-Steel Hardware

Corrosion-resistant stainless hardware supports long-term durability through Canadian weather, road spray and year-round use.

Recessed Mounting Feet

Recessed bolt-on mounting feet help maintain the clean, low-profile appearance that defines the Prinsu Pro system.

CAPACITY

Prinsu Pro Published Rack Load Ratings

DYNAMIC

700 lb

Published Pro Rack Rating

STATIC

1,200 lb

Published Pro Rack Rating

Remember: the rack's published capacity does not override Lexus or Toyota vehicle roof-load limits. Rack configuration, accessories, cargo and the vehicle itself must all be considered when determining a safe load.

TWO CONFIGURATIONS

Same Rack. Choose Your Wind Deflector.

Wind Deflector	Prinsu Part Number	Vehicle Fitment
Standard	400-002-016-003	Lexus GX 550 / Toyota Land Cruiser 250
40" Light Bar Cutout	400-002-016-004	Lexus GX 550 / Toyota Land Cruiser 250

COMPLETE THE SYSTEM

The Rack Is Shared. The Accessories Aren't.

The Prinsu Pro roof rack fits both the Lexus GX 550 and Toyota Land Cruiser 250, but the rear Window Accessory Panels and ladders are vehicle-specific. Make sure you choose accessories designed for your vehicle.

TOYOTA LAND CRUISER 250

Vehicle-Specific Accessories

Driver Accessory Panel: 600-000-000-322
Passenger Accessory Panel: 600-000-000-323
Prinsu Ladder: 600-000-000-625

LEXUS GX 550

Vehicle-Specific Accessories

Driver Accessory Panel: 600-000-000-336
Passenger Accessory Panel: 600-000-000-337
Prinsu Ladder: 600-000-000-334

VEHICLE FITMENT

Lexus GX 550 & Toyota Land Cruiser 250

Lexus: GX 550
Toyota: Land Cruiser 250 Series, 2024+
Rack Series: Prinsu Pro
Installation: No-drill, bolt-on installation
Crossbars: 10 x 47"
Rack Weight: Approximately 70 lb
Height Added: Approximately 3.5"
Wind Deflector: Standard or 40" Light Bar Cutout
Warranty: Limited Lifetime Warranty

The same rack SKUs fit both vehicle platforms. Window Accessory Panels and ladders are vehicle-specific and should be selected separately.

PROFESSIONAL INSTALLATION

Buy the Rack. Have Cap-it Install It.

Prinsu specifies no-drill installation for this rack platform, using vehicle mounting points rather than requiring permanent roof modification.

Proper installation still matters. Mounting hardware, sealing, rack alignment, accessory placement and final load configuration all contribute to a clean, reliable finished build.

Participating Cap-it locations can confirm fitment, install your Prinsu Pro rack and help build the rest of the vehicle around rooftop tents, recovery equipment, cargo, awnings, lighting and vehicle-specific Prinsu accessories.

Frequently Asked Questions

Does the same Prinsu roof rack fit the Lexus GX 550 and Toyota Land Cruiser 250?

Yes. Cap-it stocks Prinsu Pro part numbers 400-002-016-003 and 400-002-016-004 as the shared roof-rack applications for the Lexus GX 550 and Toyota Land Cruiser 250.

Is there an Original Prinsu version?

This application is offered by Cap-it as a Prinsu Pro roof rack. There is no Original rack option in this listing.

What does 40" Light Bar Cutout mean?

The front wind deflector includes an opening for a compatible forward-facing 40-inch LED light bar. Choose Standard if you do not plan to integrate a light bar into the front of the rack.

Does installation require drilling?

No. Prinsu specifies this platform as a no-drill installation.

Can I mount a rooftop tent on the Prinsu Pro rack?

Prinsu Pro racks are commonly used as rooftop-tent platforms. The complete setup must remain within the load limits of the vehicle, rack configuration, tent and mounting hardware.

How much weight is the Prinsu Pro rack rated for?

Prinsu publishes a 700 lb dynamic and 1,200 lb static rack rating. Vehicle limits and the complete rack configuration must also be considered.

Are the Window Accessory Panels interchangeable between the GX 550 and Land Cruiser?

No. The roof rack is shared, but the rear Window Accessory Panels are vehicle-specific. Choose the panel designed for your Lexus GX 550 or Toyota Land Cruiser 250.

Are the Prinsu ladders the same for both vehicles?

No. The GX 550 and Land Cruiser 250 use different Prinsu ladder applications.

Can Cap-it install my Prinsu roof rack?

Professional installation is available through participating Cap-it locations. Contact your nearest store for fitment confirmation and installation scheduling.

THE CAP-IT TAKE

Two Vehicles That Beg to Be Built.

The GX 550 and Land Cruiser 250 share a lot underneath, but they can end up serving very different owners. One may stay closer to premium daily-driver duty, while the other gets pushed quickly toward camping, recovery equipment and overland travel.

The Prinsu Pro works for both because the platform doesn't force you into one use. Keep it clean and carry skis, bikes or a cargo box. Add an awning. Add recovery gear. Add a rooftop tent and turn the roof into a major part of the build.

We particularly like that this application starts with the Prinsu Pro. These are vehicles with serious adventure potential, and the stronger rail architecture, flexible mounting system and published load capacity give you room to grow into the rack.

Start with the platform. Build the vehicle around how you actually plan to use it.

PRINSU AT CAP-IT

Buy It Online. See It in Store. Have Us Install It.

Shop Prinsu online across Canada or visit a participating Cap-it location for fitment advice, professional installation and help building your GX 550 or Land Cruiser 250.

Established 1977

Decades of truck and adventure accessory experience.

25+ Retail Locations

Real stores and real product specialists.

Professional Installation

Have the rack installed properly.

Canada-Wide Online

Shop Prinsu from coast to coast.

FIND YOUR NEAREST CAP-IT