Old Man Emu 2" BP51 Suspension Kit Lift Kit For 05-current Tacoma
2005 to Current Tacoma (6 lug)
- (1) BP5190006L - Tacoma Front Left Coilover
- (1) BP5190006R - Tacoma Front Right Coilover
- (1) VM80010016 - BP51 Fit Kit - Front
- (1) BP5160011L - Tacoma Left Rear Shock
- (1) BP5160011R - Tacoma Right Rear Shock
- (1) VM80010017 - Tacoma BP51 Fit Kit - Rear
- (2) OME Rear Leaf Springs with Bushings - Choose from Standard or HD for Constant Loads
- (1) FK29 - Driveshaft Fit Kit
- (4) 7.5" Ubolts with hardware
Requires 2 x OMESB108 bushings and 4 x OMEU53B u-bolts.
Optional and Recommended
OME Front Upper Control Arms. Recommended for all lifted Tacoma's.
- Designed to complement the lift, adding additional caster allowing for a better alignment.
Old Man Emu is pleased to release the latest application of BP-51 High Performance Bypass Shock Absorbers engineered specifically for the Toyota Tacoma. Although there are subtle weight differences between the last generation Tacoma and the new generation, with the adjustable nature of the BP-51 the OME engineers have been able to tune and design the BP-51 package to suit both applications. This package consists of 2 front coilovers, 2 rear shock absorbers and 2 fit kits.
The front coilovers have been tuned in both length and feel specifically to the Tacoma and are capable of accommodating setups with and without accessories (bumpers, winch, etc). Specific reservoir brackets have been designed for application specific reservoir placement and also relocation of the sway bar to allow clearance at the spring seat. While the front coilovers are adjustable in height, the system has been designed for a 2 inch (50mm) ride height increase and a minimum of 2 inch (50 mm) down travel.
Currently availabile for Purchase Rear shock absorbers have been tuned in length and valving specific to the Tacoma. To accommodate the large body size of BP-51 a specific lower mount bracket has been developed to provide clearance to the axle. Specific reservoir brackets have also been developed and are included in the rear fit kit.
The rear dampers are tuned to match the existing range of rear Old Man Emu springs. Recommended compression and rebound settings can be found in the supplied fitting instructions for the various spring options available.
Two rear spring options: Standard EL111R and HD EL112R for use with additional constant load.
The fitting instructions include detailed information for correct installation of the shock absorber and reservoir placement. Please note there is a left hand and right hand application due to the different reservoir mounting method and locations.
Why choose us?
We strive to offer the best in truck accessories and outdoor gear to enhance your adventures, and enjoyment of the journey.
Back to ARB 4x4 Accessories