OLD MAN EMU MT64

fits: 2016-2023 Toyota Tacoma (Gen 3)

Get more out of your Tacoma with these MT64 suspension kits. Comes with application valved MT64 shock absorbers that offer the best in balanced performance for on and off-road use. Multiple snap-ring grooves in the strut body allow for different spring seat positions, providing 2.5 inch of lift when paired with the Old Man Emu coil springs. Smooth controlled ride for everyday and long-distance driving to reduce fatigue and improve driver and passenger comfort.

ARB MT64 Shock Absorber Features - Cap-it Canada

MT64 SHOCK ABSORBERS

This highly engineered shock absorber and strut range represents an all-new segment for the brand and an unmatched customer experience, both on and off-road. Its moniker derives from the internal monotube design using an enormous 64mm (2.5 in) inner bore diameter.

These cutting-edge shocks are built to handle the unique challenges faced by vehicles equipped with campers, toppers, tents, and rack systems. These additions create a dynamic shifting load, both in terms of front-to-back and side-to-side movements. The MT64 shocks are engineered to provide exceptional performance and stability, allowing drivers to confidently navigate any terrain.

MT64 is the ultimate overlanding authority, designed for the traveler who wants a smooth ride and comfort both on and off-road. Overlanding demands shocks that can handle all conditions, day after day and that is what MT64 is designed to do.

REDINEMENT IN RIDE The massive 2.8 inch body allows for more oil and bigger piston and shim stacks, to reduce heat providing more control through the stroke giving a more refined ride

DURABLE CONSTRUCTION Featuring the same aerospace grade aluminum as our high-performance BP-51 to dissipate heat effectively, the MT64 also boasts a 7/8 inch piston rod shaft for exceptional stability

COMPREHENSIVE COMFORT In addition to smoother everyday comfort, MT64 is designed with a hydraulic end zone top out, which provides added padding at the shock’s full extension, to compensate for any unexpected bumps

ADJUSTABLE RIDE HEIGHT FOR DIFFERENT LOADS Utilizing ridges on the body of the shock, MT64 features an adjustable spring seat with 6 positions in 5mm increments, which allows for one coil spring to cater for added accessory weights

Lift Kit Parts Breakdown

Front Selection
	Load	Part Number	Quantity	Included in Kit
Coil Springs	No Load	4005	1	Choice of…
	0lbs - 110lbs	4007	1
	110lbs - 220lbs	4000	1
	220lbs - 330lbs	4002	1
	330lbs +	4004	1
MT64	Shock	MT64901007	2	Yes
TRIM PACKER		OME95PF5	EA	Optional
Rear Selection
	Load	Part Number	Quantity	Included in Kit
Leaf Springs	No Load	EL111R	2	Choice of…
Leaf Springs	Constant 660lbs	EL112R	2	Choice of…
MT64 Shocks	No Load	MT64601013L/R	1+1	Choice of…
MT64 Shocks	Constant 660lbs	MT64601014L/R	1+1	Choice of…
U-BOLT		OMEU53B	4	Yes
SPRING BUSH KIT		OMESB108	2	Yes
DRIVESHAFT SPACER KIT		FK29	1	Yes

Optional and Recommended

UCA0005 (x1) OME Front Upper Control Arms. The OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm lift). Please note after fitment of Upper Control Arm a vehicle wheel alignment will be required.
OMETH002 (x2) OME Strut Top Hat Kit. Strut Top Hat Kit may be required if original equipment it worn. If you're seeking delivery of a pre-assembled strut & coil set for easier installation, a Strut Top Hat kit is required with extra charge for labour.
OME3133 (x2) OME Upper Strut Bushes. Recommended if not purchasing new Strut Top Hat Kit. OE bushes may be re-used if in good condition.
OMEGP9 (x2) OME Greasable Pin Kit. Two (2) Greasable Pin Kits required. One (1) kit for front fixed eye and one (1) kit for shackles pin for leaf spring eye.

Questions?
Looking for feedback on which is the right combination for you?
Click "Chat" and we'll be happy to help you dial in your kit.